اندازه گیری سطح غیر تماس SGM /
مناسب برای مایعات و اندازه گیری سطح مواد پودری و گرانوله /
سنسور دمای دیجیتال یکپارچه برای جبران اندازه گیری /
منبع تغذیه 24VDC /
حفاظت مکانیکی: IP67 / IP68 (سنسور) /
خروجی:
خروجی آنالوگ جریان 4 - 20 mA
رله خروجی (vers. 4-wires) /
ATEX II 1/2G Ex ia II C T6 /
HART or MODBUS RTU com. protocol
Housing material |
PC or Al / PP wetted part (PVDF for ATEX certified vers.)
|
Mechanical installation |
2”GAS M (PP flange DN50 or DN 80 opt.) |
Protection degree |
IP67 / IP68 (sensor) |
Electrical connection |
Internal push connectors |
Working temperature |
-30 ÷ +70°C; +80°C non-continuous; -20 ° to +60 ° C for ATEX certified versions |
Pressure |
from 0,5 to 1,5 bar (absolute) |
Power supply |
2-wire: 20÷30 Vdc / 4-wire: 24Vdc |
Power consumption |
2-wire max 0,6W / 4-wire max 1,5W |
Analog output |
4÷20mA, max 750ohm (4-wire) |
Relays output |
(4-wire only) n°2 3A 230Vac (n.o.) |
Digital communication |
MUDBUS RTU for 4-wire versions; (opt.) HART for 2-wire versions |
Max measure range |
max 0.25÷5m; max 0.40÷8m [In case of non perfectly reflecting surfaces,
the maximu distance value will be reduced]
|
Blind distance |
0,25m (5m vers.) / 0,40m (8m vers.) |
Temperature compensation |
digital from -30 to 80°C |
Accuracy |
±0,5% (of the measured distance) not better than ±3mm |
Resolution |
1mm |
Calibration |
4 buttons or via HART/MODBUS RTU |
Warm-up |
5 minutes typical |
LCD Display |
Plug-in display/keyboard 4 buttons matrix LCD |
Ex-proof |
ATEX II 1/2G Ex ia II C T6
|